ergodox
Ceci est une ancienne révision du document !
−Table des matières
Ergodox
(D'autres photos : Galerie)
Flasher le firmware
J'ai tout d'abord essayé avec le firmware “tmk” mais je n'ai jamais réussi à avoir quelque chose de fonctionnel. Le firmware est apparemment envoyé sur le clavier mais pas une touche ne marche.
Pour mémoire:
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
simon@deb:~/Programmes$ git clone https://github.com/cub-uanic/tmk_keyboard.git
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
Clonage dans 'tmk_keyboard'... remote: Enumerating objects: 1, done. remote: Counting objects: 100% (1/1), done. remote: Total 17079 (delta 0), reused 0 (delta 0), pack-reused 17078 Réception d'objets: 100% (17079/17079), 22.31 MiB | 3.12 MiB/s, fait. Résolution des deltas: 100% (10038/10038), fait.
simon@deb:~/Programmes$ cd tmk_keyboard/keyboard/ergodox/ simon@deb:~/Programmes/tmk_keyboard/keyboard/ergodox$ make -f Makefile.lufa clean
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
simon@deb:~/Programmes/tmk_keyboard/keyboard/ergodox$ make -f Makefile.lufa -------- begin -------- avr-gcc (GCC) 5.4.0 Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. (...) Creating load file for Flash: ergodox_lufa.hex avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature ergodox_lufa.elf ergodox_lufa.hex Creating load file for EEPROM: ergodox_lufa.eep avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ --change-section-lma .eeprom=0 --no-change-warnings -O ihex ergodox_lufa.elf ergodox_lufa.eep || exit 0 Creating Extended Listing: ergodox_lufa.lss avr-objdump -h -S -z ergodox_lufa.elf > ergodox_lufa.lss Creating Symbol Table: ergodox_lufa.sym avr-nm -n ergodox_lufa.elf > ergodox_lufa.sym Size after: text data bss dec hex filename 23404 58 314 23776 5ce0 ergodox_lufa.elf
Vérification du MCU (voir pjrc.com) :
simon@deb:~/Programmes/tmk_keyboard/keyboard/ergodox$ cat Makefile.lufa | grep MCU # MCU name, you MUST set this to match the board you are using MCU = atmega32u4 #MCU = at90usb1286
Ensuite, j'ai essayé avec le firmware qmk (github), qui est lui-même basé sur tmk, avec plus de succès.
simon@deb:~/git$ git clone https://github.com/qmk/qmk_firmware.git simon@deb:~/git$ cd qmk_firmware/ simon@deb:~/git/qmk_firmware$ ls autocomplete.sh common.mk LICENSE shell.nix book.json Dockerfile license_GPLv2.md show_options.mk bootloader.mk docs license_GPLv3.md testlist.mk build_full_test.mk Doxyfile license_Modified_BSD.md tests build_keyboard.mk doxygen-todo Makefile tmk_core build_layout.mk drivers message.mk users build_test.mk keyboards quantum util CODE_OF_CONDUCT.md layouts readme.md Vagrantfile common_features.mk lib secrets.tar.enc simon@deb:~/git/qmk_firmware$ ls -al keyboards/ total 980 (...) drwxr-xr-x 3 simon simon 4096 avr 10 19:49 ergodone drwxr-xr-x 4 simon simon 4096 avr 10 19:49 ergodox_ez drwxr-xr-x 3 simon simon 4096 avr 10 19:49 ergodox_infinity (...) simon@deb:~/git/qmk_firmware$ ls -al keyboards/ergodox_ez/ total 84 drwxr-xr-x 4 simon simon 4096 avr 10 19:49 . drwxr-xr-x 243 simon simon 4096 avr 10 19:49 .. -rw-r--r-- 1 simon simon 673 avr 10 19:49 190hotfix.sh -rw-r--r-- 1 simon simon 4340 avr 10 19:49 config.h -rw-r--r-- 1 simon simon 11644 avr 10 19:49 ergodox_ez.c -rw-r--r-- 1 simon simon 11160 avr 10 19:49 ergodox_ez.h -rw-r--r-- 1 simon simon 8830 avr 10 19:49 info.json drwxr-xr-x 24 simon simon 4096 avr 10 19:49 keymaps -rw-r--r-- 1 simon simon 9196 avr 10 19:49 matrix.c -rw-r--r-- 1 simon simon 1298 avr 10 19:49 readme.md -rw-r--r-- 1 simon simon 3481 avr 10 19:49 rules.mk drwxr-xr-x 2 simon simon 4096 avr 10 19:49 util simon@deb:~/git/qmk_firmware$ ls -al keyboards/ergodox_ez/keymaps/ total 96 (...) drwxr-xr-x 2 simon simon 4096 avr 10 19:49 bdk drwxr-xr-x 2 simon simon 4096 avr 10 19:49 bepo_tm_style drwxr-xr-x 2 simon simon 4096 avr 10 19:49 blakedietz (...) simon@deb:~/git/qmk_firmware$ make git-submodule simon@deb:~/git/qmk_firmware$ make ergodox_ez:bepo_tm_style:all QMK Firmware 0.6.328 Making ergodox_ez with keymap bepo_tm_style and target all avr-gcc (GCC) 5.4.0 Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Size before: text data bss dec hex filename 0 30658 0 30658 77c2 .build/ergodox_ez_bepo_tm_style.hex Compiling: tmk_core/common/command.c [OK] Linking: .build/ergodox_ez_bepo_tm_style.elf [OK] Creating load file for flashing: .build/ergodox_ez_bepo_tm_style.hex [OK] Copying ergodox_ez_bepo_tm_style.hex to qmk_firmware folder [OK] Checking file size of ergodox_ez_bepo_tm_style.hex [OK] * The firmware size is fine - 30658/32256 (1598 bytes free)
Le firmware ( ergodox_ez_bepo_tm_style.hex ) est dans le dossier courant. On peut l'envoyer avec cette commande :
simon@deb:~/git/qmk_firmware$ teensy_loader_cli --mcu=atmega32u4 -v -w ergodox_ez_bepo_tm_style.hex Teensy Loader, Command Line, Version 2.1 Read "ergodox_ez_bepo_tm_style.hex": 30658 bytes, 95.0% usage Waiting for Teensy device... (hint: press the reset button) Found HalfKay Bootloader Read "ergodox_ez_bepo_tm_style.hex": 30658 bytes, 95.0% usage Programming................................................................................................................................................................................................................................................ Booting
Maintenant qu'on a compris la procédure pour envoyer un layout choisi sur le clavier, on doit faire le layout qui nous convient et recommencer la procédure.
Configurer le layout
On commence par faire une copie du layout bepo pour l'ergodox_ez :
simon@deb:~/git/qmk_firmware$ cp -r keyboards/ergodox_ez/keymaps/bepo_tm_style/ keyboards/ergodox_ez/keymaps/bepo_simon simon@deb:~/git/qmk_firmware$ ls -al keyboards/ergodox_ez/keymaps/bepo_simon/ total 32 drwxr-xr-x 2 simon simon 4096 avr 10 20:10 . drwxr-xr-x 25 simon simon 4096 avr 10 20:10 .. -rwxr-xr-x 1 simon simon 694 avr 10 20:10 config.h -rwxr-xr-x 1 simon simon 12235 avr 10 20:10 keymap.c -rwxr-xr-x 1 simon simon 770 avr 10 20:10 readme.md -rwxr-xr-x 1 simon simon 646 avr 10 20:10 rules.mk
Keymap WIP ( 10/04/2019 ) :
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
// An Ergodox EZ keymap meant to be used with a bépo layout (FR ergonomic
// layout, dvorak style). The overall design is slightly inspired by the
// TypeMatrix keyboard. Switching between a TypeMatrix and an Ergodox with this
// layout should be relatively easy.
//
// See the README.md file for an image of this keymap.
#include QMK_KEYBOARD_H
#include "keymap_bepo.h"
// The layers that we are defining for this keyboards.
#define BASE 0
#define FN 1
#define MOUSE 2
#define NUMS 3
#define SWAP 4
#define SYSLEDS 5
// The Tap Dance identifiers, used in the TD keycode and tap_dance_actions array.
#define TAP_MACRO 0
// A 'transparent' key code (that falls back to the layers below it).
#define ___ KC_TRANSPARENT
// A 'blocking' key code. Does nothing but prevent falling back to another layer.
#define XXX KC_NO
// Some combined keys (one normal keycode when tapped and one modifier or layer
// toggle when held).
#define ESC_FN LT(FN, KC_ESC) // ESC key and FN layer toggle.
#define M_RSFT MT(MOD_RSFT, BP_M) // 'M' key and right shift modifier.
#define W_RCTL MT(MOD_RCTL, BP_W) // 'W' key and right control modifier.
#define SPC_RALT MT(MOD_RALT, KC_SPC) // SPACE key and right alt modifier.
#define PERC_FN LT(FN, BP_PERC) // '%' key and FN layer toggle.
// The most portable copy/paste keys (windows (mostly), linux, and some terminal emulators).
#define MK_CUT LSFT(KC_DEL) // shift + delete
#define MK_COPY LCTL(KC_INS) // ctrl + insert
#define MK_PASTE LSFT(KC_INS) // shift + insert
// Custom keycodes
enum {
// SAFE_RANGE must be used to tag the first element of the enum.
// DYNAMIC_MACRO_RANGE must always be the last element of the enum if other
// values are added (as its value is used to create a couple of other keycodes
// after it).
DYNAMIC_MACRO_RANGE = SAFE_RANGE,
};
// This file must be included after DYNAMIC_MACRO_RANGE is defined...
#include "dynamic_macro.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | " | « | » | ( | ) | @ | | + | - | / | * | = | % | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | TAB | b | é | p | o | è | c | | v | d | l | j | z | w | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | SHIFT | a | u | i | e | ; |------| |------| s | r | n | m | ç | |
* |--------+------+------+------+------+------| k | | t |------+------+------+------+------+--------|
* | CTRL | ê | à | y | x | : | | | | q | g | h | f | $ | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* |ESC/FN| HOME | PGDN | PGUP | END | | LEFT | DOWN | UP | RIGHT|ESC/FN|
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | ! | | | ? | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[BASE] = LAYOUT_ergodox(
/* left hand */
___, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, BP_AT,
KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, BP_C,
KC_LSFT, BP_A, BP_U, BP_I, BP_E, BP_COMM,
KC_LCTRL, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K,
ESC_FN, KC_HOME, KC_PGDN, KC_PGUP, KC_END,
KC_EXLM, ___,
___,
___, ___, ___,
/* right hand */
BP_PLUS, BP_MINS, BP_SLSH, BP_ASTR, BP_EQL, KC_PERCENT, ___,
BP_V, BP_D, BP_L, BP_J, BP_Z, BP_W, ___,
BP_S, BP_R, BP_N, BP_M, BP_CCED, ___,
BP_T, BP_Q, BP_G, BP_H, BP_F, BP_DOLLAR, ___,
KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ESC_FN,
___, S(KC_SLASH),
___,
___, ___, ___),
/* Keymap 1: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | Up | HOME | UP | END | PGUP | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | LSFT |------| |------| Down | LEFT | DOWN | RIGHT| PGDW | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | CUT | COPY | PASTE| LCTRL| | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | VOLU | | HOME | END |
* ,------|------|------| |------+------+------.
* | | | VOLD | | PGUP | | |
* | | |------| |------| | |
* | | | MUTE | | PGDW | | |
* `--------------------' `--------------------'
*/
[FN] = LAYOUT_ergodox(
/* left hand */
___, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, KC_LSFT,
___, ___, MK_CUT, MK_COPY, MK_PASTE, KC_LCTRL, ___,
___, ___, ___, ___, ___,
___, KC_VOLU,
KC_VOLD,
___, ___, KC_MUTE,
/* right hand */
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___,
___, ___, KC_HOME, KC_UP, KC_END, KC_PGUP, ___,
___, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
KC_HOME, KC_END,
KC_PGUP,
KC_PGDN, ___, ___),
// Note that any change to the FN layer above must be added to
// the MOUSE layer below (except for the arrow keys).
/* Keymap 2: Media and mouse keys
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | MsUp | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[MOUSE] = LAYOUT_ergodox(
/* left hand */
___, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
___, ___, ___, KC_MS_U, ___, ___, ___,
___, ___,KC_MS_L, KC_MS_D, KC_MS_R, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___),
/* Keymap 3: Numeric keypad and system keys.
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* |PrScreen|INSERT| PAUSE| | | | | | | | | | | | NUM LK |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | =??| 7 | 8 | 9 | ?? | ?? |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| %??| 4 | 5 | 6 | ?? | |
* |--------+------+------+------+------+------| | | ?? |------+------+------+------+------+--------|
* | | | CUT | COPY | PASTE| | | | | 0 | 1 | 2 | 3 | ?? | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | ?? | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[NUMS] = LAYOUT_ergodox(
/* left hand */
KC_PSCR, KC_INS, KC_PAUS, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, MK_CUT, MK_COPY, MK_PASTE, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, KC_NLCK,
___, KC_PEQL, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_SLCK,
KC_PCMM, KC_P4, KC_P5, KC_P6, KC_PPLS, ___,
KC_PENT, KC_P0, KC_P1, KC_P2, KC_P3, KC_PAST, ___,
___, ___, ___, KC_PSLS, ___,
___, ___,
___,
___, ___, ___),
// Layer 4: hand swap, all keys are mirrored to the other side of the keyboard
// except for the layer toggle itself (so there is no right arrow when this
// layer is activated).
[SWAP] = LAYOUT_ergodox(
/* left hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
TT(SWAP), ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, TT(SWAP),
___,
___, ___, ___),
// Layer 5: The LEDs are showing the "standard" caps/num/scroll lock indicator
// instead of their default which shows the currently active layers (FN, NUMS,
// and MOUSE in that order).
[SYSLEDS] = LAYOUT_ergodox(
/* left hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, TT(SYSLEDS), ___, ___,
___, ___,
___,
___, ___, ___),
};
// Whether the macro 1 is currently being recorded.
static bool is_macro1_recording = false;
// The current set of active layers (as a bitmask).
// There is a global 'layer_state' variable but it is set after the call
// to layer_state_set_user().
static uint32_t current_layer_state = 0;
uint32_t layer_state_set_user(uint32_t state);
// Method called at the end of the tap dance on the TAP_MACRO key. That key is
// used to start recording a macro (double tap or more), to stop recording (any
// number of tap), or to play the recorded macro (1 tap).
void macro_tapdance_fn(qk_tap_dance_state_t *state, void *user_data) {
uint16_t keycode;
keyrecord_t record;
dprintf("macro_tap_dance_fn %d\n", state->count);
if (is_macro1_recording) {
keycode = DYN_REC_STOP;
is_macro1_recording = false;
layer_state_set_user(current_layer_state);
} else if (state->count == 1) {
keycode = DYN_MACRO_PLAY1;
} else {
keycode = DYN_REC_START1;
is_macro1_recording = true;
layer_state_set_user(current_layer_state);
}
record.event.pressed = true;
process_record_dynamic_macro(keycode, &record);
record.event.pressed = false;
process_record_dynamic_macro(keycode, &record);
}
// The definition of the tap dance actions:
qk_tap_dance_action_t tap_dance_actions[] = {
// This Tap dance plays the macro 1 on TAP and records it on double tap.
[TAP_MACRO] = ACTION_TAP_DANCE_FN(macro_tapdance_fn),
};
// Runs for each key down or up event.
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (keycode != TD(TAP_MACRO)) {
// That key is processed by the macro_tapdance_fn. Not ignoring it here is
// mostly a no-op except that it is recorded in the macros (and uses space).
// We can't just return false when the key is a tap dance, because
// process_record_user, is called before the tap dance processing (and
// returning false would eat the tap dance).
if (!process_record_dynamic_macro(keycode, record)) {
return false;
}
}
return true; // Let QMK send the enter press/release events
}
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
};
// The state of the LEDs requested by the system, as a bitmask.
static uint8_t sys_led_state = 0;
// Use these masks to read the system LEDs state.
static const uint8_t sys_led_mask_num_lock = 1 << USB_LED_NUM_LOCK;
static const uint8_t sys_led_mask_caps_lock = 1 << USB_LED_CAPS_LOCK;
static const uint8_t sys_led_mask_scroll_lock = 1 << USB_LED_SCROLL_LOCK;
// Value to use to switch LEDs on. The default value of 255 is far too bright.
static const uint8_t max_led_value = 20;
// Whether the given layer (one of the constant defined at the top) is active.
#define LAYER_ON(layer) (current_layer_state & (1<<layer))
void led_1_on(void) {
ergodox_right_led_1_on();
ergodox_right_led_1_set(max_led_value);
}
void led_2_on(void) {
ergodox_right_led_2_on();
ergodox_right_led_2_set(max_led_value);
}
void led_3_on(void) {
ergodox_right_led_3_on();
ergodox_right_led_3_set(max_led_value);
}
void led_1_off(void) {
ergodox_right_led_1_off();
}
void led_2_off(void) {
ergodox_right_led_2_off();
}
void led_3_off(void) {
ergodox_right_led_3_off();
}
// Called when the computer wants to change the state of the keyboard LEDs.
void led_set_user(uint8_t usb_led) {
sys_led_state = usb_led;
if (LAYER_ON(SYSLEDS)) {
if (sys_led_state & sys_led_mask_caps_lock) {
led_1_on();
} else {
led_1_off();
}
if (sys_led_state & sys_led_mask_num_lock) {
led_2_on();
} else {
led_2_off();
}
if (sys_led_state & sys_led_mask_scroll_lock) {
led_3_on();
} else {
led_3_off();
}
}
}
uint32_t layer_state_set_user(uint32_t state) {
current_layer_state = state;
swap_hands = LAYER_ON(SWAP);
if (is_macro1_recording) {
led_1_on();
led_2_on();
led_3_on();
return state;
}
if (LAYER_ON(SYSLEDS)) {
led_set_user(sys_led_state);
return state;
}
if (LAYER_ON(FN)) {
led_1_on();
} else {
led_1_off();
}
if (LAYER_ON(NUMS)) {
led_2_on();
} else {
led_2_off();
}
if (LAYER_ON(MOUSE)) {
led_3_on();
} else {
led_3_off();
}
return state;
};
Keymap WIP2 (12/04/2019) :
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
// An Ergodox EZ keymap meant to be used with a bépo layout (FR ergonomic
// layout, dvorak style). The overall design is slightly inspired by the
// TypeMatrix keyboard. Switching between a TypeMatrix and an Ergodox with this
// layout should be relatively easy.
//
// See the README.md file for an image of this keymap.
#include QMK_KEYBOARD_H
#include "keymap_bepo.h"
// The layers that we are defining for this keyboards.
#define BASE 0
#define FN 1
#define MOUSE 2
#define NUMS 3
#define SWAP 4
#define SYSLEDS 5
// The Tap Dance identifiers, used in the TD keycode and tap_dance_actions array.
#define TAP_MACRO 0
// A 'transparent' key code (that falls back to the layers below it).
#define ___ KC_TRANSPARENT
// A 'blocking' key code. Does nothing but prevent falling back to another layer.
#define XXX KC_NO
// Some combined keys (one normal keycode when tapped and one modifier or layer
// toggle when held).
#define ESC_FN LT(FN, KC_ESC) // ESC key and FN layer toggle.
#define M_RSFT MT(MOD_RSFT, BP_M) // 'M' key and right shift modifier.
#define W_RCTL MT(MOD_RCTL, BP_W) // 'W' key and right control modifier.
#define SPC_RALT MT(MOD_RALT, KC_SPC) // SPACE key and right alt modifier.
#define PERC_FN LT(FN, BP_PERC) // '%' key and FN layer toggle.
// The most portable copy/paste keys (windows (mostly), linux, and some terminal emulators).
#define MK_CUT LSFT(KC_DEL) // shift + delete
#define MK_COPY LCTL(KC_INS) // ctrl + insert
#define MK_PASTE LSFT(KC_INS) // shift + insert
// Custom keycodes
enum {
// SAFE_RANGE must be used to tag the first element of the enum.
// DYNAMIC_MACRO_RANGE must always be the last element of the enum if other
// values are added (as its value is used to create a couple of other keycodes
// after it).
DYNAMIC_MACRO_RANGE = SAFE_RANGE,
};
// This file must be included after DYNAMIC_MACRO_RANGE is defined...
#include "dynamic_macro.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | " | « | » | ( | ) | @ | | + | - | / | * | = | % | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | TAB | b | é | p | o | è | c | | v | d | l | j | z | w | VolUp |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | SHIFT | a | u | i | e | ; |------| |------| s | r | n | m | ç | VolDw |
* |--------+------+------+------+------+------| k | | t |------+------+------+------+------+--------|
* | CTRL | ê | à | y | x | : | | | | q | g | h | f | $ | Mute |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* |ESC/FN| HOME | PGDN | PGUP | END | | LEFT | DOWN | UP | RIGHT|ESC/FN|
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | ! |Delete| |BackSp| ? |
* ,------|------|------| |------+------+------.
* | | | Alt | | AltGr| | |
* | SPACE| ENTER|------| |------| ENTER| SPACE|
* | | | Fn | | Fn2 | | |
* `--------------------' `--------------------'
*/
[BASE] = LAYOUT_ergodox(
/* left hand */
___, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, BP_AT,
KC_TAB, BP_B, BP_ECUT, BP_P, BP_O, BP_EGRV, BP_C,
KC_LSFT, BP_A, BP_U, BP_I, BP_E, BP_COMM,
KC_LCTRL, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K,
ESC_FN, KC_HOME, KC_PGDN, KC_PGUP, KC_END,
BP_EXLM, KC_DEL,
KC_LALT,
BP_NBSP, KC_ENT, TT(FN),
/* right hand */
BP_PLUS, BP_MINS, BP_SLSH, BP_ASTR, BP_EQL, BP_PERC, ___,
BP_V, BP_D, BP_L, BP_J, BP_Z, BP_W, KC_VOLU,
BP_S, BP_R, BP_N, BP_M, BP_CCED, KC_VOLD,
BP_T, BP_Q, BP_G, BP_H, BP_F, BP_DOLLAR, KC_MUTE,
KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ESC_FN,
KC_BSPC, BP_QEST,
KC_ALGR,
TT(MOUSE), KC_ENT, BP_NBSP),
/* Keymap 1: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | C | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | Up | HOME | UP | END | PGUP | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | LSFT |------| |------| Down | LEFT | DOWN | RIGHT| PGDW | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | CUT | COPY | PASTE| LCTRL| | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | VOLU | | HOME | END |
* ,------|------|------| |------+------+------.
* | | | VOLD | | PGUP | | |
* | | |------| |------| | |
* | | | MUTE | | PGDW | | |
* `--------------------' `--------------------'
*/
[FN] = LAYOUT_ergodox(
/* left hand */
___, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, KC_LSFT,
___, ___, MK_CUT, MK_COPY, MK_PASTE, KC_LCTRL, ___,
___, ___, ___, ___, ___,
___, KC_VOLU,
KC_VOLD,
___, ___, KC_MUTE,
/* right hand */
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___,
___, ___, KC_HOME, KC_UP, KC_END, KC_PGUP, ___,
___, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
KC_HOME, KC_END,
KC_PGUP,
KC_PGDN, ___, ___),
// Note that any change to the FN layer above must be added to
// the MOUSE layer below (except for the arrow keys).
/* Keymap 2: Media and mouse keys
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | MsUp | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[MOUSE] = LAYOUT_ergodox(
/* left hand */
___, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
___, ___, ___, KC_MS_U, ___, ___, ___,
___, ___,KC_MS_L, KC_MS_D, KC_MS_R, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___),
/* Keymap 3: Numeric keypad and system keys.
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* |PrScreen|INSERT| PAUSE| | | | | | | | | | | | NUM LK |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | =??| 7 | 8 | 9 | ?? | ?? |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| %??| 4 | 5 | 6 | ?? | |
* |--------+------+------+------+------+------| | | ?? |------+------+------+------+------+--------|
* | | | CUT | COPY | PASTE| | | | | 0 | 1 | 2 | 3 | ?? | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | ?? | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[NUMS] = LAYOUT_ergodox(
/* left hand */
KC_PSCR, KC_INS, KC_PAUS, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, MK_CUT, MK_COPY, MK_PASTE, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, KC_NLCK,
___, KC_PEQL, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_SLCK,
KC_PCMM, KC_P4, KC_P5, KC_P6, KC_PPLS, ___,
KC_PENT, KC_P0, KC_P1, KC_P2, KC_P3, KC_PAST, ___,
___, ___, ___, KC_PSLS, ___,
___, ___,
___,
___, ___, ___),
// Layer 4: hand swap, all keys are mirrored to the other side of the keyboard
// except for the layer toggle itself (so there is no right arrow when this
// layer is activated).
[SWAP] = LAYOUT_ergodox(
/* left hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
TT(SWAP), ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, TT(SWAP),
___,
___, ___, ___),
// Layer 5: The LEDs are showing the "standard" caps/num/scroll lock indicator
// instead of their default which shows the currently active layers (FN, NUMS,
// and MOUSE in that order).
[SYSLEDS] = LAYOUT_ergodox(
/* left hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___,
___, ___,
___,
___, ___, ___,
/* right hand */
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___,
___, ___, ___, ___, ___, ___, ___,
___, ___, TT(SYSLEDS), ___, ___,
___, ___,
___,
___, ___, ___),
};
// Whether the macro 1 is currently being recorded.
static bool is_macro1_recording = false;
// The current set of active layers (as a bitmask).
// There is a global 'layer_state' variable but it is set after the call
// to layer_state_set_user().
static uint32_t current_layer_state = 0;
uint32_t layer_state_set_user(uint32_t state);
// Method called at the end of the tap dance on the TAP_MACRO key. That key is
// used to start recording a macro (double tap or more), to stop recording (any
// number of tap), or to play the recorded macro (1 tap).
void macro_tapdance_fn(qk_tap_dance_state_t *state, void *user_data) {
uint16_t keycode;
keyrecord_t record;
dprintf("macro_tap_dance_fn %d\n", state->count);
if (is_macro1_recording) {
keycode = DYN_REC_STOP;
is_macro1_recording = false;
layer_state_set_user(current_layer_state);
} else if (state->count == 1) {
keycode = DYN_MACRO_PLAY1;
} else {
keycode = DYN_REC_START1;
is_macro1_recording = true;
layer_state_set_user(current_layer_state);
}
record.event.pressed = true;
process_record_dynamic_macro(keycode, &record);
record.event.pressed = false;
process_record_dynamic_macro(keycode, &record);
}
// The definition of the tap dance actions:
qk_tap_dance_action_t tap_dance_actions[] = {
// This Tap dance plays the macro 1 on TAP and records it on double tap.
[TAP_MACRO] = ACTION_TAP_DANCE_FN(macro_tapdance_fn),
};
// Runs for each key down or up event.
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (keycode != TD(TAP_MACRO)) {
// That key is processed by the macro_tapdance_fn. Not ignoring it here is
// mostly a no-op except that it is recorded in the macros (and uses space).
// We can't just return false when the key is a tap dance, because
// process_record_user, is called before the tap dance processing (and
// returning false would eat the tap dance).
if (!process_record_dynamic_macro(keycode, record)) {
return false;
}
}
return true; // Let QMK send the enter press/release events
}
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
};
// The state of the LEDs requested by the system, as a bitmask.
static uint8_t sys_led_state = 0;
// Use these masks to read the system LEDs state.
static const uint8_t sys_led_mask_num_lock = 1 << USB_LED_NUM_LOCK;
static const uint8_t sys_led_mask_caps_lock = 1 << USB_LED_CAPS_LOCK;
static const uint8_t sys_led_mask_scroll_lock = 1 << USB_LED_SCROLL_LOCK;
// Value to use to switch LEDs on. The default value of 255 is far too bright.
static const uint8_t max_led_value = 20;
// Whether the given layer (one of the constant defined at the top) is active.
#define LAYER_ON(layer) (current_layer_state & (1<<layer))
void led_1_on(void) {
ergodox_right_led_1_on();
ergodox_right_led_1_set(max_led_value);
}
void led_2_on(void) {
ergodox_right_led_2_on();
ergodox_right_led_2_set(max_led_value);
}
void led_3_on(void) {
ergodox_right_led_3_on();
ergodox_right_led_3_set(max_led_value);
}
void led_1_off(void) {
ergodox_right_led_1_off();
}
void led_2_off(void) {
ergodox_right_led_2_off();
}
void led_3_off(void) {
ergodox_right_led_3_off();
}
// Called when the computer wants to change the state of the keyboard LEDs.
void led_set_user(uint8_t usb_led) {
sys_led_state = usb_led;
if (LAYER_ON(SYSLEDS)) {
if (sys_led_state & sys_led_mask_caps_lock) {
led_1_on();
} else {
led_1_off();
}
if (sys_led_state & sys_led_mask_num_lock) {
led_2_on();
} else {
led_2_off();
}
if (sys_led_state & sys_led_mask_scroll_lock) {
led_3_on();
} else {
led_3_off();
}
}
}
uint32_t layer_state_set_user(uint32_t state) {
current_layer_state = state;
swap_hands = LAYER_ON(SWAP);
if (is_macro1_recording) {
led_1_on();
led_2_on();
led_3_on();
return state;
}
if (LAYER_ON(SYSLEDS)) {
led_set_user(sys_led_state);
return state;
}
if (LAYER_ON(FN)) {
led_1_on();
} else {
led_1_off();
}
if (LAYER_ON(NUMS)) {
led_2_on();
} else {
led_2_off();
}
if (LAYER_ON(MOUSE)) {
led_3_on();
} else {
led_3_off();
}
return state;
};
simon@deb:~/git/qmk_firmware$ make ergodox_ez:bepo_simon:all
Cliquez pour afficher ⇲
Cliquez pour masquer ⇱
QMK Firmware 0.6.328 Making ergodox_ez with keymap bepo_simon and target all avr-gcc (GCC) 5.4.0 Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Compiling: keyboards/ergodox_ez/keymaps/bepo_simon/keymap.c [OK] Compiling: quantum/quantum.c [OK] Compiling: quantum/keymap_common.c [OK] Compiling: quantum/keycode_config.c [OK] Compiling: quantum/debounce/eager_pr.c [OK] Compiling: quantum/process_keycode/process_tap_dance.c [OK] Compiling: quantum/process_keycode/process_key_lock.c [OK] Compiling: tmk_core/common/host.c [OK] Compiling: tmk_core/common/keyboard.c [OK] Compiling: tmk_core/common/action.c [OK] Compiling: tmk_core/common/action_tapping.c [OK] Compiling: tmk_core/common/action_macro.c [OK] Compiling: tmk_core/common/action_layer.c [OK] Compiling: tmk_core/common/action_util.c [OK] Compiling: tmk_core/common/print.c [OK] Compiling: tmk_core/common/debug.c [OK] Compiling: tmk_core/common/util.c [OK] Compiling: tmk_core/common/eeconfig.c [OK] Compiling: tmk_core/common/report.c [OK] Compiling: tmk_core/common/avr/suspend.c [OK] Compiling: tmk_core/common/avr/timer.c [OK] Compiling: tmk_core/common/avr/bootloader.c [OK] Assembling: tmk_core/common/avr/xprintf.S [OK] Compiling: tmk_core/common/magic.c [OK] Compiling: tmk_core/common/mousekey.c [OK] Compiling: tmk_core/common/command.c [OK] Compiling: tmk_core/protocol/lufa/lufa.c [OK] Compiling: tmk_core/protocol/usb_descriptor.c [OK] Compiling: tmk_core/protocol/lufa/outputselect.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Class/Common/HIDParser.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/Events.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.c [OK] Compiling: lib/lufa/LUFA/Drivers/USB/Core/USBTask.c [OK] Linking: .build/ergodox_ez_bepo_simon.elf [OK] Creating load file for flashing: .build/ergodox_ez_bepo_simon.hex [OK] Copying ergodox_ez_bepo_simon.hex to qmk_firmware folder [OK] Checking file size of ergodox_ez_bepo_simon.hex [OK] * The firmware size is fine - 30706/32256 (1550 bytes free)
simon@deb:~/git/qmk_firmware$ teensy_loader_cli --mcu=atmega32u4 -v -w ergodox_ez_bepo_simon.hex Teensy Loader, Command Line, Version 2.1 Read "ergodox_ez_bepo_simon.hex": 30706 bytes, 95.2% usage Waiting for Teensy device... (hint: press the reset button) Found HalfKay Bootloader Read "ergodox_ez_bepo_simon.hex": 30706 bytes, 95.2% usage Programming................................................................................................................................................................................................................................................ Booting
ergodox.1555062105.txt.gz · Dernière modification : 2020/08/09 12:59 (modification externe)